CV Joint by Gene Line

CV Joint

While driving, your engine suffers daily wear and tear which emphasizes the need for routine check for proper maintenance. Although original factory constant velocity joints (CV joints) are crafted to last, it will eventually give in to damages which alter the efficient of its service. Even this part is often over specified for some applications, it is designed to be rigid and strong which makes it endure miles of miles of applications without needing replacement provided that the CV boot does not wear or crack.

Main function

The main function of your CV joint is to transfer the torque at a uniform speed to the wheels to facilitate free suspension motions in resisting spring actions. Found in all front-wheel drives, it is attached to both drive shaft ends packed with grease and protectively covered by the rubber or plastic boot. The practical applications of the part allows a spinning shaft to transmit power at a constant rotational speed with minimum friction that enables your vehicle to follow the course of your driving style with excellent engine response and lighter handling.

Type of CV Joints

Certain types of CV joints are employed on the drive shafts of modern cars which includes ball-type and tripod-type. A number of variations for ball-type joints are used at the inboard end where the shaft moves up or down due to suspension movements. The tripod-type is used at the outboard end of the drive shaft secured in place by a circlip. Transmission joints are very strong and usually require minimum maintenance which is limited to visual inspection. Once the CV boot wears or gets ripped, you must opt for a new boot kit to protect your CV joint. Leaving the part with worn boot results to grease leaks and induced corrosion.

Efficiency

The secret to extend the part?s life efficiency lies in packing it with enough proper greasing to effectively flush away contaminants. It may only incur failures due to wear and partial seizure with prolonged usage. Wear in the outer joint is noticeable with increased vibrations at certain speeds. These vibrations are similarly felt when you have unbalanced wheel. Strange pattering sensations through the suspension is the tell tale signs of having partial seizure. This case is usually caused by the joint overheating which results to splitting of outer joint gaiter which also throws out grease.

Opting for Replacement

Opting for immediate replacement for worn boots is essential to keep your CV joints rust free and set for miles and miles of reliable service. Prolonging the use of worn boots results to CV failure due to lack of lubrication and corrosion.

Auto Parts – CV Joint – CLICK HERE

Read More

• Your Cars Crossmember
• Your Cars Electric Cooling Fan
• Your Cars Control Arm
• Clutch Kit
• Your Cars Clutch

Your Cars Crossmember

Crossmember

When sizing up the quality and performance of a vehicle, people would only look at those things that can be seen easily and those parts that are moving. This would usually include the various body parts, the engine, the transmission, and the interior amenities. Seldom, however, would anybody care about the rigidity of the vehicles chassis. Much less would any vehicle buyer and owner know about the crossmembers of their vehicles.

Crossmembers

Crossmember, transmission crossmember, gearbox crossmember, chassis crossmember all of these terms refer to the same vehicle component. A crossmember is a long and large beam of metal, usually bent into a convoluted channel shape, that passes under the vehicle’s oil pan and connects either side of the vehicle’s chassis together. Some vehicle crossmembers are removable, allowing you to replace them with a custom or replacement crossmember whenever you want and need to. On other vehicles, however, the crossmember is designed as part of the body shell and thus can’t be removed.

Many Types of Crossmembers

There are many types of crossmembers used in different vehicles today, so if the crossmember of your vehicle is removable and you want to replace it, better know its specifications first before attempting any replacement. There are crossmembers that takes the form of a heavy gauge piece of sheet metal while there are also those that are in tubular form. Further, crossmembers may also be classified according to their designs and named accordingly. Using this classification method, crossmembers may be called K members, X members, tubular X members, etc.

Chassis Crossmembers

Now, chassis crossmembers are used on vehicles for a number of different reasons. Primarily, these components are used to strengthen the vehicle's chassis and help counter the cantilever effect of the sidewall weight. But crossmembers also have a number of secondary uses. In particular, these components are used to secure the transmission at the end where the drive shaft begins. The crossmember also anchors the lower control arms for the front wheel, help support the return air ducting, and support the engine via the engine mounts.

Very Important

So while the crossmember may not be easily noticeable because of its position, it is nonetheless a very important component for your vehicle. Without a rigid crossmember, it may be impossible for any vehicle to stand on its own. So if the crossmembers of your vehicle is already beginning to deteriorate, or if you have accidentally cut it while customizing your vehicle’s underside, you better find a replacement crossmember immediately. Alternatively, you can stay right there in front of your computer and continue browsing through the site below.

Crossmembers – Auto Parts – CLICK HERE

Read More

• Auto Parts ACT
• Your Cars Hub Caps
• Your Cars Harmonic Balancer
• Acura Cars Auto Parts
• Your Cars Fenders

Your Cars Control Arm

Control Arm

Car owners who are uninitiated often thinks that the key to their vehicle’s performance is the horsepower, torque and 0-60 acceleration. This is true to some extent; however, all of the power that is generated by a piston engine is of no use if the driver doesn’t have the ability to control the car. For this reason, car engineers turned their attention to the suspension system after they had mastered the four-stroke internal combustion engine.

Cars Suspension

The car’s suspension system maximizes the friction between the tires and the road surface to be able to provide steering ability with good handling and to make sure that the passengers are comfortable. But the suspension system cannot work alone. It has to have durable and reliable suspension parts to be able to function at its best. One important part of your vehicle s suspension system is the control arm. Control arms are often shaped like the letter A.

Control Arm Function

The control arm’s function is to manage the motion of the wheels in relation to the body of your car. Two points on the control arm ( at the bottom  of the A) attach to a vehicle s frame whereas the third point attaches to the spindle. If these control arms are not developed, you and your passengers will soon find yourselves feeling sick because of too much movement of your vehicle especially when traversing rough roads not to mention the wear and tear that worn out control arms do to the rest of your suspension system.

So, it is recommended that as early as possible, have your control arms checked regularly. If you found out that it has damaged, look for a replacement right away. Just click below and you are on your way to replacing that damaged control arm.

Control Arm – Auto Parts – CLICK HERE

Read More

• CV Joint
• Your Cars Crossmember
• Your Cars Electric Cooling Fan
• Clutch Kit
• Your Cars Clutch

Electric Cooling Fan by Gene Line

Electric Cooling Fan

Why does an engine need a cooling system? The answer is simply because an internal combustion engine can reach very high temperatures. In fact, about 70% of the energy stored in gasoline is converted into heat. The process of burning the fuel and air mixture makes the engine heat up. In order for an engine to continue operating in good condition, there must be a mechanism to help cool it down. That s why the cooling system is very im-portant in any vehicle. Its primary function is to avoid overheating in the en-gine by transferring the heat from the engine into the air. Meanwhile, dissi-pating the heat is not the only function of the cooling system. It also helps the engine heat up quickly so it can be driven as soon as you turn the key. It also helps keep the engine at a constant temperature throughout its operations.

Typical Cooling System

A typical vehicle cooling system consists of the radiator, water pump, ther-mostat, hoses, and transmission cooling lines, pressure cap and the cooling fan. There are two types of cooling systems in cars liquid cooling and air cooling. In both these types of cooling system, the cooling fan is an impor-tant and indispensable fixture. The cooling fan s function is to help maintain a constant temperature in the engine. Usually, front-wheel drive vehicles are equipped with electric fans. This is mainly because the engine of a front-wheel drive vehicle is mounted transversely or crosswise. Thus the heat from the engine is pointed towards the side of the car.

Electric Cooling Fans

Electric cooling fans are controlled either by the onboard engine computer or by a thermostatic switch. The fans are turned on the computer detects that the temperature of the coolant goes above the certain level. Once the coolant s temperature returns below that certain point, the electric cooling fan turns off. Meanwhile, rear-wheel drive cars typically have engine-driven cooling fans. These fans are controlled by a viscous clutch located at the hub of the fan. The airflow comes through the radiator. This viscous clutch is akin to the viscous coupling that can also be seen in all-wheel drive vehicles.

Cooling Fan Very Important

The cooling fan is a very important part of the cooling system. However, it is not indestructible. Over time, the cooling fan will show signs of wear and tear. Often, the mechanisms running the cooling fan will suffer from corro-sion and the rigors of operations. When this happens, car buyers need to have a professional mechanic inspect their cooling fan, as well as the entire cooling system to check for defects and damages that can hinder the system s operations. Sometimes though, the cooling fan will need to be replaced. Still, car buyers need not worry about finding high-quality cooling fan replacement as we have excellent quality cooling fan replacement here at Parts Train. Every cooling fan we offer here in our online store bears the Parts Train mark of quality and durability.

Cooling Fan – Auto Parts – CLICK HERE

Read More

• Your Cars Fender Flares
• CARS – 2010 Mercedes-Benz SL65 AMG Black Series, 2009 Dodge Viper SRT10, 2009 Chevrolet Corvette ZR1 and 2009 Lamborghini Murciélago LP640
• Your Cars Cargo Liner or Bed Liner
• Your Cars Catalytic Converter
• Acura Cars Auto Parts

Clutch Kit by Gene Line

Clutch Kit

Providing all the necessary hardware for proper installation, quality clutch kit is conveniently available for specific vehicle applications. Crafted from high grade and durable metal construction, the product ensures product longevity and reliability which yields huge savings on replacement cost. Because a good clutch is necessary to have a responsive engine towards steering, the durability and material construction of the part must be the determining factors so you are guaranteed to enjoy seamless transmission with lighter handling or miles and miles of application without needing replacements.

Clutch Package

A clutch kit comes with a clutch friction disc, clutch pressure plate, and some package includes pilot bushings or pilot bearings. The pressure plate is comprised with clutch plate, springs, cover, and release fingers which come in handy to complete your installation tasks in no time. Because securing the part in place or in position is necessary to optimize its efficiency, heavy duty hardware are bundled together for convenient product ordering to offer practical solution to maintenance.

Too Much Pressure

Too much pressure on the pedal must be avoided to keep the part in top notch and responsive working conditions. Because your clutch is constantly subject to enough strain and heat conducted via the drive shafts, it must be durable enough to bear harsh working environment. Good thing quality clutch kit manufacturers establish strength and rigidity while employing innovations in designs to enhance the performance and efficiency of your engine clutch. While other makes turn to manufacturers in the assembly of their vehicle s engine specifications, maintaining engine precision is conveniently possible.

Clutch Various Designs

Located at the clutch assembly, the product contains non-ferrous friction material. To ensure full grip on its mechanisms for applications, the product is available in various designs which caters to original part replacement to performance enhancement. Based on one or more friction discs, the material construction of the part is similar to the ones used in brake shoes; it exhibits enough strength to bear with the pressure and heat that comes inevitable during transmission. Because the part works together with vacuum and hydraulic mechanisms, it must be kept in proper working conditions. Understanding that transmission as well as suspension components coincides and comes in contact with one another, daily wear and tear may render damage to your clutch kit.

Engine Performance

With routine check and immediate replacement for worn or warped discs, you can continually enjoy excellent engine performance that enables your vehicle to match your driving style. Prolonging the use of worn kits compromises fuel efficiency and overall performance of your vehicle; opting for immediate replacement for certain parts that goes beyond repair is a more practical and economical solution to maintain engine precision.

Clutch Kit – Auto Parts – CLICK HERE

Read More

• CV Joint
• Your Cars Crossmember
• Your Cars Electric Cooling Fan
• Your Cars Control Arm
• Your Cars Clutch

Clutch by Gene Line

Clutch

If you are driving a manual transmission vehicle, for sure you know how to depress the clutch, select a gear, and then release the clutch while applying power to get the vehicle to move. But as a driver or vehicle owner, do you know exactly what happens when you depress and release the clutch? If you are a car enthusiast, perhaps you already know this. But if you are not, then you have to be familiar with this important vehicle component called the clutch.

Clutch Component

The clutch is an auto component that allows the engine power to be applied gradually when your vehicle is starting out and interrupts this power in order to avoid gear crunching when shifting. When you engage the clutch, what happens is that power transfers from the engine to the transmission and drive wheels. And when you disengage it, the power transfer is stopped and the engine is allowed to continue turning without force to the drive wheels. However, engaging and disengaging the clutch won t be done effectively if the basic components that make these processes work are not in good condition such as the flywheel, clutch disk, pressure plate, throw-out bearing and linkage. And so, it is really important to inspect these parts regularly for any signs of damage.

Clutch Life

Generally, the clutch on a manual transmission vehicle lasts from four to seven years. But this depends mainly on your personal driving habits and where you often drive. So if you want to determine when it s time for you to replace or adjust your clutch, then you must be aware of some warning signs. Poor gas mileage and a revving engine sound when you accelerate are few of these signs. You also have to take note that if your clutch engages and disengages close to the floorboard or when the transmission grinds when shifting, chances are your clutch has to be adjusted or replaced. And if the clutch pedal moves easily but the transmission does not go into gear, perhaps your clutch linkage is disconnected or there is a snapped clutch cable. Whatever signs you see, it is always best to take immediate action in repairing, adjusting, or replacing your clutch before it can cause you more problems.

Clutch – Auto Parts – CLICK HERE

Read More

• CV Joint
• Your Cars Crossmember
• Your Cars Electric Cooling Fan
• Your Cars Control Arm
• Clutch Kit

Catalytic Converters by Gene Line

Catalytic Converters

Having a clean air has never been as important today than it was before. That s why a lot of emission control standards and laws have emerged so that emissions coming from a vehicle s engine could be controlled. In response, many car and engine manufacturers have utilized various technologies, and continue to find better ones, to make their car engines emit less harmful substances while sustaining its performance. Aside from engine redesign, the catalytic converter has also been a great help in keeping engine emissions safer.

Catalytic Converter an Emission Control Product

The catalytic converter is an emission-control product that ensures that the exhaust coming out of your vehicle is safe from harmful substances like hydrocarbons and other harmful byproducts of your engine s combustion process. It is an integral part of your car s exhaust system that is located under the vehicle and looks very much like its muffler. Every road vehicle is required to have a catalytic converter, although some are equipped with two catalytic converters.

How Does It Work

So how does a converter work?  The reduction catalyst converts the nitrogen oxides into harmless emissions while the oxidation catalyst burns out the hydrocarbons and carbon monoxide, all of which are byproducts of gas or fuel combustion. A sensor, also located inside the converter, would also aid in controlling the air-to-fuel ration being burned in the engine to reduce the harmful emissions produced by the engine. After going though all these processes, the exhaust that goes out of the catalytic converter is safer and less harmful.

Emission Laws Require

Present emission laws require all road vehicles to be equipped with an operational catalytic converter. Further, cars are still tested for their emission levels. So if your car s catalytic converter is already defective or clogged, it is definitely timely to replace it with a new one. You can easily notice a defective catalytic converter as it also affects the total performance of your engine as well as its fuel consumption. Click on our online catalog to locate products with up to date availability listing easy and fast.

Catalytic Converters – Auto Parts – CLICK HERE

Read More

• Your Cars Exhaust
• Your Cars Catalytic Converter
• CV Joint
• Your Cars Crossmember
• Your Cars Electric Cooling Fan

Cargo Liner / Bed Liner by Gene Line

Cargo Liner

The cargo capacity is one of the factors considered when buying a new car. Cars are one of the most sought after possession commonly dreamed of by almost anyone. It is intended not only to take a person from one location to the other but also as a means to spend quality time with family, friends and loved ones especially on out of town trips and adventures. A well-kept clean interior can give a relaxing atmosphere particularly if the driver or passenger is tired from the long hours of work, school and other tiring activities.

Cargo Wear & Tear

However the cargo can be easily subjected to wear and tear due to mud, dirt, water spills and other particles and stains that can damage the cargo areas especially if it remains bare and unprotected. Good thing there are cargo liners around to give the needed protection that will prolong the efficiency and service of the cargo areas. The passengers themselves are the culprit responsible for the stains and dirt that can damage the cargo. Mud, silt, road debris and rock particles can get stuck on the shoes which in turn can be carried inside the cargo area. However with cargo liner in place, the floor is free from spills and stains.

Cargo Liners

Cargo liners come in several assortments with lots and loads of style, design and shape to choose from. Its features and installation procedures may vary depending on the type, configurations and dimensions of the vehicle. SUV cargo liner is different from a minivan, truck or sedan so make sure that you know the features of your own car before settling with a specific type of cargo liner.

Custom Fit

Custom fit cargo liners are preferred over universal made ones since the owner can ensure that it will perfectly fit the distinctness of their car s interiors. Cargo liners with raised edges and textured surfaces can be a good choice since it can accommodate more spills and dirt as compared with other types. Common materials used in making a cargo liner are vinyl nylon, rubber, polyethylene. Rubber cargo liners have greater resistance against heavy abrasions. Make sure that it is installed with a good grip on the floor surface to prevent slipping out of place.

Several stores offer custom fit and universal made cargo liners to suit various car makes and models including SUV, trucks, vans, sedans or coupes. Aside from the usual stores from where you personally purchase aftermarket replacements, on line or web based stores are now in full swing to give you fast and comfortable purchase. Just make sure that you are transacting business with a trusted authentic store to avoid scams and bogus transactions. Click on our online catalog to locate products with up to date availability listing easy and fast.

Car Cover – Auto Parts – CLICK HERE

Read More

• CV Joint
• Your Cars Crossmember
• Your Cars Electric Cooling Fan
• Your Cars Control Arm
• Clutch Kit

Your Cars Cab Corner by Gene Line

Cab Corner

Cars are just machines. No matter how well you take care of them, they will eventually suffer from wear and tear. Rust, collisions, and some other factors greatly contribute to the wear and tear of your vehicle. Collisions can be avoided, but how about corrosion? If you know the proper way to maintain your car s perfect condition, it would help to further prolong the life and value of your second largest investment.

Common Problem

A very common problem on vehicles particularly on some full-size trucks is cab corner deterioration. Car owners that live on some parts of the country that have harsh weather conditions can attest to this fact. Mud, rain, snow and other harmful elements bring damage to your cab corners.

Damaged Cab Corner

Anyway, replacing a damaged cab corner is just easy, it doesn t even require a lot of time and you can do it on your own. But if you want to have it replaced by a mechanic, it doesn t matter. It just takes 20-30 minutes and after, you ll see the difference. So, here s how. First, you should cut away the rotten cab corner using a cutting wheel. Then, get your replacement cab corner and trim it a little bigger than needed with a plasma cutter.

New Cab Corner

After that, drill some holes so you can spot weld the new cab corner in position. Place it on top of the original cab corner. Using a cutting wheel, cut the overlapping cab corner and remove the damaged one. Make sure you have completely positioned the new cab corner so you will have a perfect fit. Just weld it and double check if it s ready for clean up. If it s ready, clean it and paint with a shade that will match your car s exterior design.

Cab Corner – Auto Parts – CLICK HERE

Read More

• CV Joint
• Your Cars Crossmember
• Your Cars Electric Cooling Fan
• Your Cars Control Arm
• Clutch Kit

Your Cars Bumper Molding by Gene Line

Bumper Molding

Accessories are installed in vehicles for variety of purpose. Some accessories are mounted to enhance the appearance of the vehicle while some are designed to improve the functionality of several auto components. There are also accessories that contribute to vehicle and driving safety and there are some that protects and shield the auto parts into which they are installed. Bumper molding belongs to the latter type of accessories. They are aimed to protect the vehicle s bumper against some possible damages it might receive.

Essential Component

The molding that goes around the bumper is called bumper molding. It is available in one or three pieces and can be installed in the upper or lower section of the bumper. To fully understand the function of a bumper molding, it is better to first look closer on the various roles that the bumpers have to perform in the vehicle. Bumpers are unquestionably among the vehicle s most essential component. They perform both a practical and aesthetic functions. More significantly, bumpers serve as important safety features. These auto components are molded into specific shapes and are positioned in the utmost front and rear part of the vehicle in order to take in the momentum in the event of collision. Bumpers absorb the impact of minor collisions to lessen the damage that can be received by the car and its occupants. Aside from being a natural shock absorber during minor car crashes, bumpers are also responsible for accentuating the vehicle s front and rear fascia.

Bumpers Ability

As a bumper add-on or accessory, the bumper molding improves the bumper s ability to absorb the impact of collisions. Since this molding is wrapped around the bumper, it also does the job of protecting the bumper from the wear and tear of work and recreational activities. Just imagine when you use your vehicle for off-roading. In the absence of bumper molding, those off-road bumps and grinds could have totally damage your bumper and other components in the vehicle s front and rear section. Bumper moldings also give your bumper a distinct look. These reasons make investing on a bumper molding a wise decision.

Like other auto accessories, bumper moldings for various vehicle makes and models are also available in most auto-part store in the industry. Just click below at a one-stop auto-part’s shop that offers top of the line bumper molding for whatever vehicle you own. If you want to gear up your vehicle for off-road driving, or you simply want to protect its bumpers, bumper molding by clicking below.

Bumper Molding – Auto Parts - CLICK HERE

Read More

• CV Joint
• Your Cars Crossmember
• Your Cars Electric Cooling Fan
• Your Cars Control Arm
• Clutch Kit